AFR 165cc Small Block Ford Street Heads
All New High Flow Ford Torque
Monsters
For the ultimate small block Ford street car, you've got to use AFR's
all new 165cc cylinder heads. Unlike some aftermarket heads, AFR's Ford
head fits all your stock components; no special parts are required! With
1.900 intake valves, 1.600" exhaust valve, and combustion chamber
volumes of 58cc or 64cc, AFR's new 165cc Ford head is perfect for 289
and 302 engines operating from idle to 6000 rpm. Will not accept rail
rocker arms. Hardened push rods required with part numbers 1400 and
1402. Certification by the California Air Resources Board to allow legal
use on pollution controlled vehicles E/O #250-3.
|
165cc Ford Street Head Flow (CFM @ 28"
H2O)
|
|
.200 Lift
|
.300 Lift
|
.400 Lift
|
.500 Lift
|
.550 Lift
|
.600 Lift
|
|
Intake
|
Exhaust
|
Intake
|
Exhaust
|
Intake
|
Exhaust
|
Intake
|
Exhaust
|
Intake
|
Exhaust
|
Intake
|
Exhaust
|
|
123
|
118
|
186
|
153
|
225
|
178
|
250
|
185
|
250
|
190
|
250
|
191
|
165cc SBF Cylinder Head Part
Numbers
Street CNC Ported Pairs of
Cylinder Heads Complete With Parts and Ready to Install
Prices start at $1325.00
| Description |
Part Number |
| 165cc Street, 58cc, stud mount |
1402 |
| 165cc Street, 58cc, pedestal |
1472 |
| 165cc Street, 64cc, stud mount |
1400 |
| 165cc Street, 64cc, pedestal |
1470 |
Basic Package Components
CNC Ported Combustion Chambers
CNC Ported Exhaust Ports
CNC Ported Intake Ports
Competition 5-angle Valve Job
Intake Valve, 1.900"
Exhaust Valve, 1.600"
1.450" OD Hydraulic Valve Spring, 120 lbs. on seat, .550"
maximum lift, AFR #8020
10º 4140 Chrome Moly Retainers, AFR #8510
10º Valve Locks, AFR #9005
3/8" Rocker Studs, AFR #6410
5/16" Guide Plates, AFR #6107
Valve Seals, AFR #6611
Hardened Shims, AFR #6326
Intake Valve Seats, AFR #9063
Exhaust Valve Seats, AFR #9070
Bronze Valve Guides, AFR #9050
Special orders available upon request.
All Accessory Holes are Predrilled!
Specifications,
Features, and Supporting Components
Head Torque: 65-70 Ft. Lbs. with 7/16" stud
Rocker Stud Torque: 55-60 Ft. Lbs.
Rocker Pedestal Torque: 25-30 Ft. Lbs.
Intake Port Gasket: 1.200"x2.000" Fel Pro #1250, AFR #6828
Exhaust Port Gasket: Fel Pro #1415, AFR #6837
Head Gasket: 1962-82, Fel Pro #1011-1, AFR #6808; 1983-93, Fel Pro
#1011-2, AFR #6809
Head Bolts & Studs: Standard ARP, AFR #6323 & #6322
Head Bolt Washers: Manley, AFR #6320
Stud Girdle: Standard
Suggested Manifold: Most EFI or Carburetor Style Manifolds
Spark Plug Starting Range: AC FR3LS
Combustion Chambers: 58cc or 64cc
Spring Pocket can be cut to 1.625, no deeper.
Valve Spacing: Standard
Rocker Arms: Standard, will not accept rail rocker arms
Valve Angle: Standard
Angle Mill: .008" per cc
Flat Mill: .006" per cc
|
