Chevy 383 c.i Stroker Long Block

350 H.P / 400 Lbs. Torque! for only $2,199.00

* Block: Magnuflux, line honed and square decked. Square decking is essential to keeping equal compression on each cylinder. For a few extra bucks you may want to get the block zero decked. This feature makes the piston flush with the deck at top dead center.

* Heads: Magnuflux, 3 angle valve job, hard exhaust seats, heavy duty 110 lbs. springs that will handle a .500 lift cam.

* Rods: ARP wavelock bolts installed, each rod is magnufluxed and shot pinged. We use a 5.7” rod for this combo for reliability purposes. This keeps the rod ratio close to the stock ratio at 1.52 compared to 1.63 from stock. Fully grinded for clearance.

* Crank: Scat 9000 series nodular iron, knife edged and balanced within 1 gram.

* Pistons: Speed Pro 383 Hypereutectic graphite coated skirt 10.0:1 compression.

* Cam: Hydraulic dual pattern .465/.484 lift and 206/214 degrees of duration @.050 on a lobe center of 112 makes it smog legal.

Long block includes new HV oil pump, 3 piece double roller timing set and a full set of gaskets. Extras: Timing cover, oil pan, valve covers, balancer and flex plate.

Read what Sport Truck Magazine wrote about our 383 Stroker engine - click on the magazine cover to read full story >>>>>>>>>>>>>>>>>>>>>>

Shipping is about $260.00 and is calculated at check-out. Note: Engines are sold on a like for like exchange basis, otherwise a Core Chare of $225.00 for a 2 bolt main applies.

'68-'85 Chevy part #C383CE1	$2,199.00
'86-'92 Chevy part #C383CE10 - uses one piece rear main seal	$2,299.00
'93-'98 Chevy part #C383CE12 Vortec	$2,499.00
Short block only C383SB1 (2 pc. rear seal)	$1,899.00
Short block only C83SB10 (1 pc. rear seal)	$1,999.00
Short block only C383SB12 (Vortec block)	$2,199.00

CLICK HERE FOR:

Chevy 350 Mallory Distributor Part#9148201

Comp 9000 Unilite Breakerless Ignition

New $229.95 ONLY 1 AVAILABLE

COMP 9000 Distributors

COMP 9000 distributors are the next best thing to a billet unit. They are available in Dual Point, Unilite and Magnetic Breakerless versions with mechanical or vacuum advance (except Dual Point). They and can be used to drive OEM and Mallory Promaster coils as well as HyFire and MSD ignitions. COMP 9000 distributors feature an aircraft quality cast housing, adjustable mechanical advance, specially designed, counterbalanced rotor and adapter shield interlock to prevent arcing and crossfire and the largest distributor cap diameter in the industry to eliminate cap arcing and crossfire.